|Needle thread trimmer||Long thread trim||Long thread trim||Short thread trim|
|Bobbin thread trimmer||None||Long thread trim||Short thread trim|
|Main applications||Suit-dress||Men’s clothing, casual clothing||Jeans trousers, trousers|
|Other applications||Men’s clothing, casual clothing, jeans trousers, trousers||Suit-dress, jeans trousers, trousers||–|
|Function||Only trim the needle thread. The max. Length of the buttonhole is 50mm;||Trimming both needle thread and bobbin thread||Trimming both needle thread and bobbin thread.No need second trim|
|Sewing length||Round-head eyehole 8-50mm Straight buttonhole 5-50mm||Round-head eyehole 8-42mm Straight buttonhole 5-42mm||22-30mm* 14-22mm* 18-26mm* 26-34mm* 34-42mm*|
|Press foot length (standard)||30mm||30/26mm|
|Length of the hammer (standard)||22mm||24/20mm|
|Length of the hammer (accessory)||30mm||28/24mm|
|Zigzag sewing width||1.5-5.0mm (In mechanical conditions, it is 4.0Mm wide at most and the zigzag sewing width is 5.0 At most.)|
|Zigzag sewing width (factory setting)||2.5mm||3mm|
|Length of stream thread||0-20mm|
|Height of work clamp||Standard height is 12mm (may reach 16mm at highest)||16mm|
|Start-off mode||Double pedal switch|
|Fabric feeding device||Intermittent cloth-sending of 3 pulse motors (x,y,θ)|
|Machine needle 4||DOx558 Nm80 – Nm120|
|Safe setting||If there are any problems, the inner setting with urgent stop function and driven by safe circuit will automatically stop the machine|
|Upper shaft motor||AC-servo motor 550W|
|Air pressure||Main regulator : 0.5Mpa;Hammer-pressure regulator : 0.4Mpa|
|Air consumption volume||43.2 liter/minute (8 cycles/minute)|
|Power supply||Single-phase 100V / 200V, Three phases 200V /220V/ 380V/ 400V, 400VA|
|Weight||Machine head: ~ 120kg / Operation board :~0.6kg / Control box:14.2-16.2kg|
Improved pipe port to make connection much easier
Special process processing of gears and cams,a significant reduction in the machine noise and vibration,after a scientific experimental test,the noise than the historical data reduced by 8-10db,the operator’s comfort greatly improved.
Making the accurate pattem The machine controlled by servo system,it makes the patterns accurate even in high speed stitching.servo control system avoid the initial position checking.
The position and adjustment of cutting knife can be adjusted by operate panel.All these adjustments will be showing in the operate panel in image.
special specification of thread trimmer for -02 model
The machine model -02 can stitch big size pattern for both casual pants and jeans.the length of eyelet button hole can be 18-26mm.